QC/T 80-2011 道路车辆-气制动系统用尼龙(聚酰胺)管
作者:标准资料网 时间:2024-05-07 01:19:54 浏览:9388
来源:标准资料网
基本信息
标准名称: | 道路车辆-气制动系统用尼龙(聚酰胺)管 |
英文名称: | Road vehicles-Polyamide (PA) tubing for air braking systems |
中标分类: |
车辆 >>
汽车底盘与车身 >>
制动系统 |
ICS分类: |
道路车辆工程 >>
道路车辆装置 >>
制动系统
|
替代情况: | 替代QC/T 80-1993 |
发布部门: | 中华人民共和国工业和信息化部 |
发布日期: | 2011-05-18 |
实施日期: | 2011-08-01 |
首发日期: | |
作废日期: | |
归口单位: | 全国汽车标准化技术委员会 |
起草单位: | 河北亚大汽车塑料制品有限公司 |
出版社: | 中国计划出版社 |
出版日期: | 2011-08-01 |
页数: | 24页 |
书号: | 1580177.644 |
适用范围
本标准规定了汽车气制动系统用尼龙管及管总成的尺寸规格、性能要求、试验方法、检验规则、包装、标志、运输及贮存等要求。
本标准适用于最大工作压力为1.0 MPa的管路系统及最大工作压力为1.25 MPa的管路系统。
本标准规定的管路系统适用的工作温度范围为-40℃~100℃。不适用于牵引车和拖车之间的气制动系统用尼龙螺旋管总成。螺旋管总成的要求见QC/T 79的规定。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 车辆 汽车底盘与车身 制动系统 道路车辆工程 道路车辆装置 制动系统
【英文标准名称】:Invitrodiagnosticmedicaldevices-Measurementofquantitiesinbiologicalsamples-Metrologicaltraceabilityofvaluesforcatalyticconcentrationofenzymesassignedcalibratorsandcontrolmaterials
【原文标准名称】:体外诊断医疗装置.生物样品的定量测量.校准仪和控制材料所赋酶的催化浓度值的计量溯源性
【标准号】:ISO18153-2003
【标准状态】:现行
【国别】:国际
【发布日期】:2003-08
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC212
【标准类型】:()
【标准水平】:()
【中文主题词】:测量精度;特性记述;描述;基准方法;检查材料;实验室条件下诊断;规范(验收);实验室;计量学;评定;表;生物化学制品;实验室医学;系统论;磨损量;分类系统;诊断(医学);诊断;催化剂;参考材料;标准参考测量方法;化学分析和试验;特性;人用的药物;浓缩值;再循环;试样;医学科学;测量系统;测量;测量技术;尺寸;定义;分类;在实验室条件下;诊断设备;校准仪;酶
【英文主题词】:Biochemicals;Calibrator;Catalysts;Characterisations;Characteristics;Checkmaterial;Chemicalanalysisandtesting;Classification;Classificationsystems;Concentrationvalues;Definitions;Descriptions;Diagnosis;Diagnosis(medical);Diagnosticequipment;Enzymes;Evaluations;Humanmedicine;Invitro;In-vitrodiagnostic;Laboratories;Laboratorymedicine;Lists;Measurement;Measuringaccuracy;Measuringsystems;Measuringtechniques;Medicalsciences;Metrology;Recirculation;Referencematerials;Referencemeasuringmethods;Referencemethods;Samples;Size;Specification(approval);Systemology;Wear-quantity
【摘要】:ThisEuropeanStandardspecifieshowtoassurethemetrologicaltraceabilityofvaluesassignedtocalibratorsandcontrolmaterialsintendedtoestablishorverifytruenessofmeasurementofthecatalyticconcentrationofenzymes.Thecalibratorsandcontrolmaterialsarethoseprovidedbythemanufacturersaspartof,ortobeusedtogetherwith,invitrodiagnosticmedicaldevices.Thefollowingsubjectsareoutsidethescopeofthisstandard:a)requirementsforthedesignorselectionofareferencemeasurementprocedure;b)quantitiesinvolvingmassofenzymeorimmunoreactivityofenzymes;c)controlmaterialsthatdonothaveanassignedvalueandareusedonlyforassessingtheprecisionofameasurementprocedure,eitheritsrepeatabilityorreproducibility(precisioncontrolmaterials);d)controlmaterialsintendedforintralaboratoryqualitycontrolpurposesandsuppliedwithintervalsofsuggestedacceptablevalues,eachintervalobtainedbyinterlaboratoryconsensuswithrespecttoonespecitiedmeasurementprocedure,andwithlimitingvaluesthatarenotmetrologicallytraceable;e)metrologicaltraceabilityofroutineresultstotheproductcalibratorandtheirrelationstoanymedicaldiscriminationlimit;f)propertiesinvolvingnominalandordinalscales.
【中国标准分类号】:C30
【国际标准分类号】:11_100_10
【页数】:10P;A4
【正文语种】:英语
基本信息
标准名称: | 金属弹簧吊架 |
中标分类: |
船舶 >>
船舶管路附件 >>
船用管件 |
发布日期: | 1986-05-20 |
实施日期: | 1987-06-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
出版日期: | 1900-01-01 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 船舶 船舶管路附件 船用管件